turbine disc
英 [ˈtɜːbaɪn dɪsk]
美 [ˈtɜːrbaɪn dɪsk]
网络 废气涡轮叶轮
双语例句
- For the design of a particular model of turbine rotor disc, the MDO system for turbine disk and blade is built.
针对某型号发动机涡轮转子盘片结构，设计开发了涡轮盘片多学科设计优化系统； - In practice, the turbine disc and the nozzles are fitted into a casing.
实际上，涡轮圆盘和喷嘴是装在机壳里的。 - Fatigue Reliability Optimization of a Turbine Disc Based on Ant Colony Algorithm
基于蚁群算法的轮盘疲劳可靠性优化方法研究 - Structure analysis and life evaluation of the pin holes in a turbine disc of a type of aero-engine
某型发动机涡轮盘销钉孔结构分析与寿命评估 - Calculating the Temperature Field of a Gas Turbine Disc with Finite Element Method
有限元法计算燃气轮机叶轮温度场的研究 - The Calculation of the Inner Three-dimensional Flow Field of a Centrifugal Turbine Disc and Its Engineering Applications
离心叶轮内部三元流场计算在实际工程中的应用 - A nonlinear Continuum Damage Mechanics model was employed to analyze the creep life and damage of a gas turbine disc of a engine under typical flight, then, the results were compared with those from present linear damage cumulating theory.
采用非线性连续损伤力学模型对某发动机涡轮轮盘在典型任务工况下的蠕变损伤和寿命进行分析，并同当前普遍使用的累积损伤理论进行比较，指出了累积损伤理论存在的问题。 - The abrasion experiments and mechanical tests of 4 kinds of steels treated with heat are conducted on hydraulic turbine simulation disc equipment.
对经多种热处理工艺处理的四种钢材，在水轮机模拟圆盘仪上进行了磨蚀试验及力学性能测试。 - An Analysis of the Vibration Characteristics of a Gas Turbine Bladed Disc
燃气轮机叶片轮盘振动特性分析 - Applications of Spray Forming Superalloys for Turbine Disc
喷射成形技术在涡轮盘高温合金中的应用 - Finally, depend on the stress-strain analysis results and the material's fatigue characteristics, we select S-N curve method and Manson-coffin formula respectively for the fatigue damage calculation and life prediction of the turbine disc.
最后，通过前述应力（应变）的分析计算结果和材料的疲劳特性，分别选用S-N曲线法和Manson-Coffin的Morrow修正式法，对该发动机涡轮盘进行了疲劳损伤与寿命的计算。 - Reliability Design of Steam Turbine Disc
汽轮机叶轮的可靠性设计 - In this paper, the fracture accident at the rim of turbine disc for an industrial gas turbine is calculated and analyzed.
某烟气轮机涡轮盘发生了盘缘断裂掉块事故，某航空发动机Ⅰ级涡轮盘也大量发生槽底裂纹的故障。 - Analysis of turbine disc response in thermal-mechanical loads
航空发动机涡轮盘热&机械载荷耦合响应分析研究 - Prediction of Low Cycle Fatigue Life for Turbine Disc by Small Sample& Webayes Method
某涡轮盘小子样低周疲劳寿命评估计算&威伯斯先验评估法 - Fracture analysis for turbine disc
涡轮盘的破裂分析 - This paper describes the method of reliability design for steam turbine disc. The method includes the analysis of reliability design of the static strength, the vibration and the thermal fatigue on steam turbine discs. Some examples of the reliability design for steam turbine discs are given.
本文介绍了汽轮机叶轮的可靠性设计方法，包括叶轮静强度、轮系振动和叶轮热疲劳的可靠性设计分析方法，并给出了汽轮机叶轮可靠性设计的实例。 - An engineering evaluation system of turbine disc cooling configuration
旋转盘腔冷却问题的工程评价 - A research on cracked failures of fir-tree serration in aeroengine turbine disc
航空发动机涡轮盘榫齿裂纹故障研究 - Elastic-plastic Analysis Oil the Turbine Wheel Disc of the Supercharger
增压器涡轮盘的弹塑性分析 - Effects of Seed Diameter, Length of Friction and Gear Gap on Hulling Efficiency CRACK DETECTION OF TURBINE DISC MORTISE OF AERO-ENGINE BY NONDESTRUCTIVE TESTING
籽粒粒径、碾搓行程和齿盘间隙与破壳效果相关性的研究发动机涡轮盘榫齿裂纹的探测 - Cracks Analysis of Sealing Labyrinth on High-pressure Turbine Disc ⅱ in an Aero-engine
某发动机高压Ⅱ级涡轮盘封严篦齿裂纹分析 - Analysis of a Turbine Disc Damage Caused by Forcign Objects
涡轮盘外物损伤事故分析 - Precise FEA of tenon and mortise joint in turbocharger crack detection of turbine disc mortise of aero-engine by nondestructive testing
增压器涡轮叶片和轮盘榫齿组装结构的精细有限元分析发动机涡轮盘榫齿裂纹的探测 - Turbine disc Missile Analysis of nuclear power station
核电站汽轮机转子飞裂分析 - Crack detection of turbine disc mortise of aero-engine by nondestructive testing
发动机涡轮盘榫齿裂纹的探测 - A turbine disc was also successfully calculated with the design optimization method. Thus, the problem of dimension conversion was solved.
同时将其应用于某涡轮盘的冷、热态尺寸换算，从而成功地解决了涡轮典型部件冷、热态尺寸换算问题。 - Analysis of cracks on serration of turbine disc
高压涡轮盘榫齿裂纹分析 - By way of the three-dimensional stress analysis of EC-301 closed type centrifugal turbine disc integral structure the authors have come up with a novel method of integral structure stress analysis for a rotating turbine disc by using general finite element analysis procedures and temperture-treated interference fit.
通过对闭式离心叶轮EC&301的整体结构三维应力分析.提出了一种用温度处理过盈配合.用通用有限元分析程序对旋转叶轮进行整体结构应力分析的新方法。